Knowledge Center
How Do You Measure Triple-Pane Glass and Air Space Thickness?
Short answer: Use a laser-based glass and air space meter that works from one side of the window. EDTM's GC3001 Glass-Chek PRO measures each pane, each air space, and the overall IG thickness of a triple-pane unit in one test, so you do not have to remove the glass.
Why triple-pane units need a dedicated tool
A triple-pane unit has three separate panes of glass and two air spaces between them. Calipers cannot reach inside a sealed unit, and a tape measure only gives you overall thickness. To order a matching replacement, you need to know the thickness of each pane and each air space. This is what glass thickness measurement tools are for.

Steps to measure a triple-pane unit
1. Clean the glass surface where you will place the meter.
2. Turn on the meter and select the unit of measure. The GC3001 can show inches or millimeters.
3. Place the meter flat against the glass as the manual instructs.
4. Press the test button. The meter reports glass thickness, air space, and overall IG thickness.
5. Record each value. Check a second spot on the window.
The meter shows glass thickness in one column and air space in another, as the GC3001 manual illustrates.
What the meter reports
• Thickness of each pane of glass.
• Thickness of each air space.
• Overall thickness of the sealed unit.
• Low-E coating detection, including type and surface, on supported models.
Other tools in the family
Browse all glass air space thickness detectors EDTM sells. The GC3200 Glass-Chek ELITE handles up to quad-pane units according to its manual.
For double-pane specifics, see how to measure the thickness of double-pane glass.
Frequently asked questions
Can you measure triple-pane glass from one side?
Yes, with a tool built for it such as the GC3001.
What if the unit has laminated glass?
The GC3001 manual includes guidance for laminated glass, including Low-E against the PVB layer.
Do I need to take the window apart?
No.
