Improve your Manufacturing Productivity

Manufacturing mistakes are costly. Locating the Tin side of glass is difficult to impossible, therefore numerous mistakes occur throughout the manufacturing process. EDTM's TS1300 is the perfect device for detecting the tin-side.

Anyone who requires the detection of this tin-side should purchase this device for the following reasons:

Receiving & Inspection: Verify receipt of correct product from your parts supplier

Stockroom: Handle lost labels, mislabled items, and ensure proper stockroom location
placement.

Production: Prevent wasted time due to using the wrong item. (Do it right the first time
because it costs twice as much the second time)

Quality Assurance/Control: Ensure quality throughout the entire production process from
from start to customer shipment

Test & Measurement: Qualify, quantify, and perform your measurements quickly.

Manufacturing mistakes are costly. It is difficult to locate the invisible Self-Cleaning coating, therefore numerous mistakes will occur throughout the manufacturing process. EDTM's RD1350 is the perfect meter for detecting these Photocatalytic Self-Cleaning Glass coatings.

Anyone who needs to detect these invisible self-clean coatings should purchase this meter for the following reasons:

Receiving & Inspection: Verify receipt of correct product from your parts supplier

Stockroom: Handle lost labels, mislabled items, and ensure proper stockroom location
placement.

Production: Prevent wasted time from using the wrong item. (Do it right the first time
because it costs twice as much the second time)

Quality Assurance/Control: Ensure quality throughout the entire production process from
from start to customer shipment
Test & Measurement: Qualify, quantify, and perform your measurements quickly.

EDTM, Inc. Surface Resistivity Meters measure from 0-199.9 or 0-19,990 ohms/square for accurate surface resistivity measurements. The measurements are calibrated using a National Institute of Science and Technology (NIST) traceable standard. The RC2175 and RC3175 meters are low-cost, battery operated, lightweight, and extremely simple to use.

Anyone who needs to perform surface resistivity measurements should purchase this meter for the following reasons:

Receiving & Inspection: Verify receipt of correct product from your parts supplier

Stockroom: Handle lost labels, mislabled items, and ensure proper stockroom location
placement.

Production: Prevent wasted time due to using the wrong item. (Do it right the first time
because it costs twice as much the second time)

Quality Assurance/Control: Ensure quality throughout the entire production process from
from start to customer shipment

Test & Measurement: Qualify, quantify, and perform your measurements quickly.

EDTM, Inc. Solar Meters measure the Solar light spectrum from UVA through near infrared. The power measurements are calibrated using a National Institute of Science and Technology (NIST) traceable standard to match the entire solar spectrum of the sun. The SP1065 and SP2065 can measure BTU/hr-ft2 or W/m2, and the SP2065 can perform transmission measurements from 0-100%.

The units are low-cost, battery operated, lightweight, and extremely simple to use. Anyone who needs to perform broad based solar light measurements should purchase these meters for the following reasons:

Receiving & Inspection: Verify receipt of correct product from your parts supplier

Stockroom: Handle lost labels, mislabled items, and ensure proper stockroom location
placement.

Production: Prevent wasted time from using the wrong item. (Do it right the first time
because it costs twice as much the second time)

Quality Assurance/Control: Ensure quality throughout the entire production process from
from start to customer shipment

Test & Measurement: Qualify, quantify, and perform your measurements quickly.

EDTM, Inc. UV Meters measure the UVA spectrum from 360-400nm. The power measurements are calibrated using a National Institute of Science and Technology (NIST) traceable standard. The UV1265 and UV1365 can measure UV Light Transmission from 0-100%. The UV1365 can measure mW/cm2 and provide temperature measurements.

The units are low-cost, battery operated, lightweight, and extremely simple to use. Anyone who needs to perform UV power or transmission measurements should purchase this meter for the following reasons:

Receiving & Inspection: Verify receipt of correct product from your parts supplier

Stockroom: Handle lost labels, mislabled items, and ensure proper stockroom location
placement.

Production: Prevent wasted time due to using the wrong item. (Do it right the first time
because it costs twice as much the second time)

Quality Assurance/Control: Ensure quality throughout the entire production process from
from start to customer shipment

Test & Measurement: Qualify, quantify, and perform your measurements quickly.

EDTM, Inc. Visible Light Meters measure the Light spectrum from 400-700nm for accurate VLT and tint meter measurements. The power measurements are calibrated using a National Institute of Science and Technology (NIST) traceable standard. The VP1165 can measure W/M2, from 0-100% and provide temperature measurements. This VLT / Tint Meter unit is low-cost, battery operated, lightweight, and extremely simple to use.

Anyone who needs to perform Visible Light power or transmission measurements should purchase this meter for the following reasons:

Receiving & Inspection: Verify receipt of correct product from your parts supplier

Stockroom: Handle lost labels, mislabled items, and ensure proper stockroom location
placement.

Production: Prevent wasted time due to using the wrong item. (Do it right the first time
because it costs twice as much the second time)

Quality Assurance/Control: Ensure quality throughout the entire production process from
from start to customer shipment

Test & Measurement: Qualify, quantify, and perform your measurements quickly.

This book is the best book we have found to explain how and why windows work. This simple to read book explains SHGC, SC, VLT, Hard Coat LOW-E vs Soft Coat LOW-E performance characteristics, gas filling and much more.

A little knowledge in the hands of your manufacturing, quality assurance, and test & measurements personnel goes along ways towards producing a final quality product.

Use it in:

• Quality Assurance/Control
• Test & Measurement
• Receiving & Inspection
• Stockroom
• Production